Tello APN settings (Android)
Independent guide: this is not a page from Tello.
Verified on against the carrier's official source
Tello APN: wholesale
Use this guide only if mobile data or picture messages (MMS) stop working on an active Tello line. These settings restore the normal connection of your own plan: they do not add data, change your plan or remove charges.
Before you start
- Your phone must be unlocked and compatible with Tello, and your line must be active with a plan that includes data.
- Turn on Mobile data and check that you have signal.
Steps
- Open Settings > Connections (or Network & internet) > Mobile networks (or SIMs) > Access Point Names.
- Tap ⋮ > Reset to default, make sure Tello or fast.t-mobile.com is selected and test mobile data.
- If it still does not work, tap Add (+) and enter the values below exactly as written (upper/lower case and commas matter).
- Tap ⋮ > Save, select the new APN and restart the phone.
Values published by Tello
- Name:
Tello - APN:
wholesale - MMSC:
http://wholesale.mmsmvno.com/mms/wapenc - Port:
8080 - MCC:
310 - MNC:
240 - APN type:
default,supl,mms - APN protocol:
IPv4/IPv6
Leave all other fields blank or as they are. Type the APN type default,supl,mms with no spaces; if your phone shows checkboxes, tick only those three options.
If it still does not work
Turn airplane mode on and off and restart the phone. If the problem continues, contact Tello through its official support channels. Do not use APN profiles shared by unofficial sources.
How we verified this page
The values come from the carrier's official page, checked on October 5, 2026. We only publish what the carrier publishes: no values from forums, other sites or unofficial profiles.